The further adventures of the Heathkit AT-1

Work has been conspiring to eliminate my spare time but I was able to spend a few hours over the Easter holiday to clean up the shack and make space to put the Heathkit AT-1 on the desk again. I have been able to spend a little time going over parts that need to be replaced and making a list.

The Heathkit AT-1 chassis with case and VFO-1 behind.

There doesn't seem to be any show stoppers although the wafer of the meter switch has broken in two and will need to be repaired. If I'm not able to repair it then thankfully it is fairly simple and replacement rotary switch can be substituted.

This isn't going to be a museum quality restoration but the changes that were made to this transmitter in the past were sensible and if left in place are representative of period modifications. The original meter for example was not the highest quality and a Western or Simpson replacement would be an improvement. The original slide switches have been replaced with period snap-toggle switches which are also an improvement over the original.

The Heathkit VFO-1 however has been modified for grid-block keying which is a significant departure from the original and I plan to revert it back to cathode keying. Although a technical improvement it is not in keeping with the original design and needs to be undone. Everyone will have their own opinion but I think if I wanted modern circuits I'd get a more modern rig, so the VFO-1 will be returned to stock.

Hopefully I can carve out a bit of time here and there to work on this and slowly return it to working condition.